| Customization: | Available |
|---|---|
| Type: | Gear Pump |
| Quality: | High-Quality |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameter | Specification |
|---|---|
| Engine Type | 4-cylinder, liquid-cooled, 4-stroke, diesel engine |
| Water Pump Type | Centrifugal, belt-driven |
| Water Pump Material | Cast iron or aluminum |
| Pump Rotation | Clockwise (when viewed from the pulley side) |
| Impeller Diameter | 67 - 72 mm (depending on model) |
| Number of Impeller Blades | 6-8 blades |
| Flow Rate | Approximately 80 - 100 liters per minute (varies by model) |
| Coolant Capacity (Entire System)
|
Approximately 7.5 - 10 liters (depending on application) |
| Pulley Type | V-belt or multi-groove serpentine (depending on version) |
| Water Pump Pulley Diameter | Approximately 125 mm - 140 mm (varies by model) |
| Water Pump Drive Belt Tension | Tension values vary; typically 5-7 mm belt deflection at 10-15 N |
| Thermostat Operating Temperature | 82-95°C (180-203°F) |
| Operating Temperature Range | 70-95°C (158-203°F) |
| Water Pump Bolt Torque | Typically 20-25 Nm (always consult the service manual) |
| Seal Type | Mechanical seal |
| Bearing Type | Sealed ball bearing |
| Technology |
All of our hydraulic engineers have more than 8 years' valve group design experience.
They can choose the most suitable matching hydraulic valve parts according to the hydraulic principle to achieve its function.
The valve block design layout is reasonable with compact structure and beautiful appearance design.
|
| Equipment | Our processing equipment are the international first-tier brand processing center. Professional customized molding tool is used for the jack and oil port of valve block to ensure the processing efficiency and precision. |
| SurfaceTreatment |
Our steel material mainly uses high phosphorus with nickel plating, which greatly increases the rust resistance of the valveblock.
Salt spray testing machine is equipped for our company. Each batch of valve blocks are tested for 90 hours of salt spray.
|
| Details | We have professional deburring tools and experienced staff to remove large burrs and flanges by hand grinding. Then, ultrasonic cleaning machine to clean the valve block thoroughly. The oil impurities in the internal flow of the valve block will be cleaned by the high-frequency vibration of the cleaning fluid. The endoscope is used to check the deeper drill way to ensure that the valve block is completely without burr and impurities. |
| Closed-loop Trading Process | Scientific Production Plan Arrangement | Rigorous Quality Testing |
| Platformisation Drawing Management | Prompt Delivery for Customers' Orders | Sufficient Strategically Inventory |
| Positive On-site Support | Extensive Industry Experience | Better Post-sale Service |
){kind=link}